╃苍狼山庄╃1、重启设备，按Ctrl＋B进入Bootrom菜单，输入密码8060后显示：
================
| <1> Boot With Default Mode |
| <2> Boot From Flash |
| <3> Enter Serial SubMenu |
| <4> Enter Ethernet SubMenu |
| <5> Change Flash Boot File |
| <6> Modify Bootrom Password |
| <7> Reboot |
==================================
Enter your choice(1-7):
2、然后按Ctrl＋Z进入隐含菜单：
Hidden Menu...
===========
===========
| <1> Enter Debugging Environment |
| <2> Erase Flash |
| <3> Delete file from Flash |
| <4> Upgrade Small BootRom |
| <5> Upgrade South-Bridge Logic |
| <6> Display Flash Files |
| <7> Enter Flash-Aging Test |
| <8> Recover console0 password... |
| <9> Exit To Main Menu |
=====================================
Enter your choice(1-9):
3、选择6显示配置文件名称：
Display Files in Flash.
1:...800-VRP3[1].30-0359(08).bin 8422620 bytes
2:flash:/matnlog.dat 94696 bytes
3:flash:/private-data.txt 16 bytes
4:...firewallv200r006c02b028.bin 12994900 bytes
5:flash:/vrpcfg.zip 556 bytes===========
===========
| <1> Enter Debugging Environment |
| <2> Erase Flash |
| <3> Delete file from Flash |
| <4> Upgrade Small BootRom |
| <5> Upgrade South-Bridge Logic |
| <6> Display Flash Files |
| <7> Enter Flash-Aging Test |
| <8> Recover console0 password... |
| <9> Exit To Main Menu |
=====================================
Enter your choice(1-9):
4、选择3删除配置：
BE CAREFUL!
This may cause your system fail to start!
Please input the file name you want to delete,
(e.g. Eudemon.bin)-->vrpcfg.zip
This Would Take Long Time,Wait Please...
Delete it? Yes or No(Y/N)y
Deleting File...Done
5、再选择<9> Exit To Main Menu返回主菜单；
6、最后在主菜单中选择<7> Reboot重启。
1、重启设备，按Ctrl＋B进入Bootrom菜单，输入密码8060后显示：
================
| <1> Boot With Default Mode |
| <2> Boot From Flash |
| <3> Enter Serial SubMenu |
| <4> Enter Ethernet SubMenu |
| <5> Change Flash Boot File |
| <6> Modify Bootrom Password |
| <7> Reboot |
==================================
Enter your choice(1-7):
2、然后按Ctrl＋Z进入隐含菜单：
Hidden Menu...
===========
===========
| <1> Enter Debugging Environment |
| <2> Erase Flash |
| <3> Delete file from Flash |
| <4> Upgrade Small BootRom |
| <5> Upgrade South-Bridge Logic |
| <6> Display Flash Files |
| <7> Enter Flash-Aging Test |
| <8> Recover console0 password... |
| <9> Exit To Main Menu |
=====================================
Enter your choice(1-9):
3、选择<8> Recover console0 password... 清除密码；
4、再选择<9> Exit To Main Menu返回主菜单；
5、最后在主菜单中选择<7> Reboot重启；
6、系统重启后可以直接通过Console进入系统，不需要用户名和密码；
7、进入系统后需要立即修改console密码，否则再次重启后仍然需要鉴权后才能进入系统，密码设置方法：
system
[Eudemon]local-user admin password cipher admin888
[Eudemon]local-user admin level 3
[Eudemon]user-interface con 0
[Eudemon-ui-console0]authentication-mode aaa
[Eudemon-ui-console0]user-interface aux 0
[Eudemon-ui-aux0]authentication-mode aaa
[Eudemon-ui-aux0]user-interface vty 0 4
[Eudemon-ui-vty0-4]authentication-mode aaa
[Eudemon-ui-vty0-4]quit
[Eudemon]quit
save
The current configuration will be written to the device.
Caution:
The executing "save" command on firewall can affects the quality
of some types of traffic for the time of configuration saving.
Are you sure?[Y/N]y
Now saving the current configuration to the device........................................
Save the current configuration to the device successfully.
这样就设置密码成功并保存！
备注：
1、Eudemon 100的缺省BootROM口令为空。
2、Eudemon 200、500/1000等默认的BootROM密码是8060 。